The Sheet Bend

The Sheet bend is used to join together 2 lines of different diameters. It is useful when using a light heaving line to pass a heavier tow line to a boat or dockline to shore. When used to tie one line to an eye-splice or a metal ring, it is called a Becket bend. A Becket Bend on a Bight can be used to attach a tow line to an all-rope towing bridle.

To tie a sheet bend: Begin with a loop in the heavier line. Pass the bitter end of the smaller line up through the loop of the heavier line, around the heavier loop, and back through the loop in the small line. Tighten it up. Both bitter ends should be on the same side (as shown).

Return to Knots